By Wilde Becker. Speaker Stands. At Wednesday, July 24th 2019, 02:02:33 AM.
Many stands come with a compartment dedicated to sand and similarly heavy and well-damped materials. And there’s method in the madness. You see, the speaker plays music by moving its drive unit in and out to create sound pressure: when the drive unit pushes outwards, it creates sound pressure, but when it moves inwards it pushes the entire speaker backwards.
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.
If the output from the sub seems uneven, you need to try and find a location where it produces a less lumpy response. A good tip for doing this is to temporarily place the sub where you normally sit to mix, and then listen at different places around the edges of the room while playing back a same level chromatic (semitone) scale of sine waves from a sampler until you find the spot that produce the most consistent level across all notes.