Published at Sunday, January 05th 2020, 14:00:34 PM. Speaker Stands. By Edsel Zimmermann.
There you have it; the basics of why you should consider stands for your bookshelf speakers. As with much in hi-fi, this is only the introduction to a massive subject, but it serves as a good understanding of stands function and what they can do for your hi-fi system. And they can do a lot for providing your speakers with the optimal condition for top-notch performance.
And stands do more than combatting early reflections. They also provide what’s called decoupling between your speakers and the floor (which is also known as mechanical isolation). We will let Otto describe their construction: “Take your typical Dynaudio Stand; you have feet with either spikes for solid floors or rubber for wooden ones at the bottom. Then you have a base plate that manages vibrations. Also, large base plates with feet far apart are more stable, making it harder for the speakers to fall over.
Even if you already have a loudspeaker stand, you can still use one of these foam–based speaker platforms on top of it to reduce the amount of vibration getting into the stand and subsequently into the floor. Many of the commercially available platforms come with additional foam wedges that may be used to adjust the vertical angle of the speaker if necessary.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.