Published at Wednesday, July 31st 2019, 07:41:29 AM. Speaker Stands. By Ekerd Werner.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
A speaker platform is designed primarily to provide a degree of mechanical isolation between the speaker and the surface upon which it is placed, while keeping the speaker firmly in place. This is particularly important when siting speakers on lightweight desks or shelves, as these can easily be set into vibration if in direct contact with a speaker cabinet.
And stands are especially helpful in the low-frequency area, as this part of the frequency spectrum is omnidirectional and therefore more sensitive to surfaces nearby than the high-frequency area.
You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.