By Wilde Becker. Speaker Stands. At Wednesday, July 03rd 2019, 04:43:55 AM.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
One of the roles of an effective speaker support is to prevent such vibrations from being transferred into other structures, such as wooden floors, desktops, shelves or mixer meterbridges. It should also hold the speaker as firmly as possible, to reduce movement due to the action/reaction effect.
An isolation platform works in a similar way to a car’s suspension, and comprises three mechanical components: a spring, a mass supported by the spring, and some form of damping to prevent the sprung mass from continuing to bounce around. In a car you have the springs between the axles and the car body: the car body provides the mass and the shock absorbers provide the damping, to stop you having a bouncy ride.
Where vibrations are allowed to leak into any studio furniture or wooden floors, the audible result is often a blurring of the bass and lower mid range, as well as a deterioration in the stereo image. By using an appropriate stand or platform, the bass end should tighten up to a very noticeable degree, leaving the mids sounding clearer and the imaging better defined.
That’s where you need to put the sub. If your sub has a phase adjustment knob, or a polarity–invert switch, adjust this until you hear the loudest result from frequencies around the crossover point, typically 80 to 120 Hz.
The SLX Series is a professional quality stand which caters for larger bookshelf speakers where an increase in the footprint is required to ensure optimum stability.