Published at Tuesday, January 07th 2020, 16:24:55 PM. Corner Tv Stands. By Ekerd Werner.
Measure the front of your television. Unlike picture size, which is determined by measuring on a diagonal (lower left to upper right), the width of the TV is ascertained by measuring from the lower right corner to the lower left. Write this number down.
Note that the rear of this unit doesn't go into a sharp point. There are two main types of corner stand to consider. Some are slightly tapered, like the one in the example here.
Be sure that the corner wall-mount bracket and hardware are sufficiently rated to hold your particular television. A flat-screen TV set weighing more than 125 pounds should be mounted with a dual-arm bracket. Smaller sets can be wall-mounted using a single-arm bracket.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.