By Wilde Becker. Speaker Stands. At Tuesday, July 02nd 2019, 16:52:16 PM.
You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
That’s where you need to put the sub. If your sub has a phase adjustment knob, or a polarity–invert switch, adjust this until you hear the loudest result from frequencies around the crossover point, typically 80 to 120 Hz.
Popcorn is a fun, balanced bite for the entire family. With or without the accessories, then you are sure to love the popcorn created at your premises. A few revealed the speaker stand home theatre isn't tough to construct plus has not shifted yet and stay vertical.