Published at Tuesday, July 30th 2019, 01:17:25 AM. Corner Tv Stands. By Ekerd Werner.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Adjust the TV to the desired viewing angle by pivoting the set on the mounting arm(s), which are typically a ball-and-socket arrangement that allows the set to be turned.
Input the equation into your calculator. Use the smaller measurement of the two walls as both the A and B measurements. For example, if the smaller measurement is 20 inches, you want to input 20 squared (or 20 x 20) plus 20 squared (or 20 x 20). Once you have the answer (in this case it is 800), find the square root of the number and you will have the size, in inches, your TV must be smaller than in order to fit onto a TV stand (in this case it is about 28 inches).
If you have many AV components and think that most corner TV stands do not offer adequate storage space, you could always consider a standard TV stand which has tapered corners. Much like the ones highlighted on this page.