By Wilde Becker. Speaker Stands. At Wednesday, July 03rd 2019, 16:31:14 PM.
And, of course, it needs to put the speaker in the correct position relative to the listener, which usually means with the tweeter aimed at an imaginary point just behind the listener’s head. Note, though, that a few speakers are deliberately designed to be aimed directly ahead rather than at the listener, so always check the recommendations in the manual that comes with your particular loudspeaker before directing them inwards.
Fortunately, we don’t need to balance the speaker on actual springs, as a suitably dense piece of acoustic foam can act as both spring and damper. The speaker cabinet provides mass — so sitting a speaker cabinet directly onto a piece of foam, such as an Auralex MoPad, will bring about an improvement in the amount of vibrational energy getting through to the desk. However, foam isn’t particularly rigid, so the cabinet may still tend to move back and forth slightly as the speaker cones move, especially if the speaker cabinet isn’t particularly heavy.
To sum up, the platforms with a heavy plate of some type on top are the most effective, though you can add mass very easily to any type of support by using floor tiles. Similarly, the more massive and better damped a speaker stand, the less vibrational energy is likely to make it through to the floor and less the stand itself will vibrate. Compared with the cost of speakers, adding suitable stands or platforms is relatively inexpensive, yet it can make a very worthwhile improvement to the overall sound quality!
The best plate generally will come with a pre-drilled gap at the center, which makes it easy to mount gear. Most high plates are made from rubber to get a superior grip onto the entire speaker cabinet. The primary rationale is that you are in a position to paint the outside to coincide with insides together with split or airplane the wood to portray minimalist or intricate details. There are not any rough edges on these speakers.