Published at Thursday, December 12th 2019, 13:40:24 PM by Conradina Scholz. TV Stands. This guide should help you to decide which TV stands for flat screens best meet your need, and will assist you when choosing the right model from the wide choice available.
Published at Tuesday, July 30th 2019, 01:17:35 AM. tv cabinet By Hardtman Fuchs. These tended to be rectangular in design, although as many TV's are positioned in the corner of the room, it wasn't long before corner TV stands were developed.
Published at Tuesday, July 30th 2019, 01:17:34 AM. tv shelf By Adalwine Huber. The corners can be a useful place to locate your hardware, as it utilizes an area of your room that is often wasted - and placing your equipment along a wall can often encroach too far into your living space.
Published at Tuesday, July 30th 2019, 01:17:34 AM. corner wardrobe By Edsel Zimmermann. With this type of stand, it is important to carefully consider if your existing AV components will fit.
Published at Tuesday, July 30th 2019, 01:17:30 AM. speaker system By Conradina Scholz. So, what should you do instead? We’ve talked to our product team to learn more – and the solution is stands. Sideboards, tables and chairs are out of the question, too. Speaker stands are specifically designed to bring the best out of your speakers by managing vibrations, reducing early reflections and ensuring the proper amount of treble. Together with our Product Manager - Home, Otto Jørgensen, we’ve taken a look at the fundamentals.
Published at Tuesday, July 30th 2019, 01:17:29 AM. 7.1 speakers By Edsel Zimmermann. Their smaller stands are made from a type of plastic and their larger ones from cast metal. All are perfectly valid approaches. Note that some speakers, such as certain Genelec models and Event’s Opals, already come with resilient isolating platforms or feet and so may not need additional treatment.
Published at Tuesday, July 30th 2019, 01:17:28 AM. speaker pole By Ekerd Werner. The theory is that the mass and spring characteristics are chosen so that the resonant frequency of the combination is well below that of any frequency they’re likely to be asked to isolate. For example, if the lowest note a speaker can reproduce is 30Hz, then the resonant frequency of the supporting platform needs to be well below that — perhaps just a few Hertz or less.
Published at Tuesday, July 30th 2019, 01:17:26 AM. rear speakers By Cort Friedrich. You could just plonk your speaker onto the top of your chosen stand, of course, but it’s best to have the speaker fixed to the stand in some way, because otherwise it can slide around. One popular and effective method is to place blobs of Blu–Tack under each corner; this acts as both a removable adhesive and as a damping medium. Another alternative is to use high–friction rubber matting, of the type sold for workshops and kitchens.