Published at Wednesday, December 18th 2019, 22:44:59 PM. Corner Tv Stands. By Ekerd Werner.
Drill holes for the mounting bracket into the studs following the wall markings as a guide. Use wall anchors if studs are not located in the corner where the TV will be installed, but be certain the wall construction is sufficient to support the television. Wood paneling, for example, may not be strong enough to support the set without splitting or cracking.
Input the equation into your calculator. Use the smaller measurement of the two walls as both the A and B measurements. For example, if the smaller measurement is 20 inches, you want to input 20 squared (or 20 x 20) plus 20 squared (or 20 x 20). Once you have the answer (in this case it is 800), find the square root of the number and you will have the size, in inches, your TV must be smaller than in order to fit onto a TV stand (in this case it is about 28 inches).
If you decide to purchase a corner TV stand with a mount, you should bear in mind the stand will not fit as deep into the corner as a model without a mount. This is because brackets usually attach to the rear of the stand and you will be restricted by the width of the TV.
However, more recently, it is more common to find a wooden corner TV stand. The Sauder Harbor View Corner TV Stand pictured below is a good example. There are plenty of nooks and crannies to place your equipment, but the rear corners are cut to allow easier placement in a corner.